Cold rolling forming machine manufacturers introduce the maintenance of cold bending equipment

　　Cold rolling forming machine manufacturer: What are the maintenance and principle analysis of cold bending equipment?

　　Cold bending equipment manufacturers specialize in producing cold bending machines, CNC cold bending machines, hydraulic cold bending machines, etc. The maintenance of cold bending machine equipment is very important, and it can effectively extend the service life of the cold bending machine equipment. Before operating the cold bending machine, it is necessary to check whether all parts of the machine have been lubricated accordingly. The main shaft of the cold bending machine should be lubricated with high-temperature grease. If the grease is added improperly, it will affect the heat dissipation function of the cold bending machine, and the bearing will not work properly.

　　Regularly check the roller bearings of the cold bending machine. The working environment of this position is relatively harsh, and it is easy to cause bearing damage. If bearing damage is found, it must be replaced in time to avoid greater losses. The gear box grease has good fluidity. Regularly check the running condition of the gear box. If you cannot hear any sound, please check the bearings of the cold bending machine in time.

　　Cold rolling forming machine manufacturer: On the working principle of cold bending forming unit

　　First of all, we should know its components. The cold bending machine consists of six parts: cold bending system, hydraulic system, electrical control system, mechanical transmission, base and auxiliary system. Then, the working principle of the cold bending machine is the initial operation, that is, placing the gantry in the auxiliary system in the center of the two active rollers, and then following the hydraulic system, the hydraulic cylinder pushes the dovetail groove and the cold bending roller to cold press the steel. In this process, when the required arc is reached, the hydraulic system can be closed.

　　At this time, restart the mechanical system, let the active roller rotate, and then rely on the friction to drive the steel to move forward slowly, so as to realize continuous and efficient cold bending operation. After the belt is completed, close the mechanical transmission, start the hydraulic system, and restore the hydraulic cylinder to its original state, placing the cold bent steel on the gantry of the auxiliary system to complete the entire work process.

　　It seems a simple process, but in many details, it is worth paying attention to and careful operation.

　　Cold rolling forming machine manufacturer: Maintenance measures for cold bending equipment

　　Cold bending equipment manufacturers specialize in the production of cold bending machines and cold bending forming machines, with professional cold bending forming technology and cold bending pressing equipment. The cold bending machines produced are complete in quantity, reliable in quality, and reasonable in price, and have been recognized by new and old customers. So, what are the maintenance measures for cold bending machines?

　　The safety measures for cold bending forming equipment are as follows: When maintaining the cold bending machine, the power supply of the cold bending machine and the external main power supply must be cut off, and live operation is not allowed. Unless you are familiar enough with the equipment, do not disassemble any parts of the cold bending machine at will.

　　Do not touch the wire connectors or other parts that may be exposed to the outside at will. Before disassembling or moving the protective device on the light steel keel machine or replacing parts, the power must be cut off first. Try to stand on a plastic blanket for maintenance, and do not place the cold bending machine in a place with floor water or a very humid environment. When maintaining the cold bending forming machine, safety gloves, goggles and long-sleeved work clothes must be worn to prevent body parts from being burned by high temperature or the surface of parts from being burned by high temperature.

　　The editor of the cold rolling forming machine manufacturer will introduce it here. Thank you for watching.