The air duct production line is a sophisticated mechanical equipment. The quality and stability of the qualified air duct production line are very high. However, as the use time increases, improper equipment maintenance, worker errors and other factors will cause some problems in the air duct production line, the following examples illustrate The common faults and solutions of the air duct production line.

Seven duct production lines

　　 1. The touch screen displays the hydraulic overload alarm and flashes. Solution: Check whether the pressure of the hydraulic station system of the air duct production line is too high, whether the oil pump is damaged and the thermal relay trips, remove the electrical box cover, and manually reset the thermal relay.

　　2. The touch screen displays the emergency stop and servo alarm of the system and flashes. Solution: Release the emergency stop button next to the touch screen of the air duct production line.

　　3. The unwinding machine does not stop or does not unload the material. Solution: Check whether the photoelectric switch of the material picking rack of the air duct production line is damaged or the connection line is disconnected. The time relay in the unwinding electromechanical box is damaged. Check and replace.

　　4. The air pipe production line does not lift the knife after punching a small mouth. Solution: It may be that the solenoid valve is blocked by debris, and the machine can be cleaned up.

　　5. The punching die and shearing knife of the air duct production line cannot operate. Solution: Check whether the electrical circuit or equipment of the machine is damaged, and replace and repair it in time

　　. 6. After the air duct production line starts production, the size of the sheet material is unstable or the sheet material only keeps moving. Solution: Check the encoder and signal line to see if there is deviation or damage, and repair it in time.

　　7. The produced product has cracks. Solution: Check whether the raw materials are qualified and whether the operators are negligent.

Everyone should pay attention to the proper operation when using the air duct production line, and regularly maintain the equipment. If there is a serious problem, it is recommended to contact the duct production line manufacturer as soon as possible and seek help. Generally, the duct production line manufacturer will have perfect after-sales service. Tube production line manufacturers provide maintenance services, so that if the equipment has a problem, if you seek help at the first time, you can efficiently solve the equipment failure, quickly resume production, and ensure the smooth progress of the project.