Below is a description of the operation of a fully automatic duct production line and precautions for using a corner steel rolling machine
Jan 25,2022
Below, we will discuss the operation of the fully automatic duct production line and precautions for using the angle iron rolling machine.
How to operate and run a fully automatic duct production line?
The normal operation and running of a fully automatic duct production line depend on the normal operation of the machine. Therefore, to ensure the normal operation of the machine and prevent faults during daily duct production, maintenance and upkeep of the duct production machine are necessary. The manufacturer of fully automatic duct production lines indicates that the maintenance of a fully automatic duct production line should be carried out from the following aspects.
1. The duct cleaning system has high requirements for the material of the hose. It needs to have dust-proof, good airtightness, and smooth inner wall characteristics. It should be tightly connected to the duct equipment, with strict requirements for the appearance of the air outlet, qualified quality, and smooth and flat frame and blades.
2. When making the air valve, there should be opening and closing marks. The connection points of the multi-leaf valve blades should overlap, and the axial distance deviation should be within 1 mm. For flexible pipes, their tightness should be appropriate, the length should be within the construction specification and meet the design requirements, and cracking and twisting are not allowed.
3. For the manufacturing requirements of the engine cover, it is specifically manifested as a completely balanced regular shape, with a size deviation of within 2 mm per meter. The rotating parts of the fire damper need strong anti-corrosion performance, and its closure should be airtight.
Precautions for using the angle iron rolling machine
As for the angle iron rolling machine equipment, its service life consists of two parts: one is careful operation during use, and the other is maintenance and upkeep during daily work. Many maintenance works have been introduced earlier. So how can the operation extend the service life of the angle iron rolling machine?
Before using the angle iron curling machine, a start-up test should be conducted to check if there are any problems with the equipment. Then, check the oil level indicated by the oil level mark on the side of the gearbox. If the oil level is lower than the oil pipe, lubricating oil needs to be injected from the box cover into the box until the limit position is reached. Therefore, after checking, the equipment is placed steadily, the four wheels are evenly stressed, and production activities can be carried out.
Here are some detailed operations that can also help extend the life of the angle iron rolling machine.
1. When feeding the pressure wheel, first loosen the upper nut, reach the scale, and then tighten the fixed round nut. When the passive pressure wheel enters, the workpiece should be withdrawn.
2. After using it for a period of time, clean up the residue left by the pressed workpiece in time to avoid affecting the normal use of the angle iron rolling machine.
3. After using it for a period of time, check the oil level indicated by the oil level gauge on the side of the gearbox oil tank. Add oil in time if the oil level is too low.
4. When using, pay attention to the operation within the working range and do not exceed the load.
That's all for today's introduction. Thank you for watching. If you need a fully automatic duct production line, an angle iron rolling machine, or a cutting machine, you can contact our manufacturer.
Consult Now
Email:
Service Hotline:
Scan code to consult：
Sales Consultation
After-sales Service Consultation
More News
ONLINE CONSULTATION
Please consult if you have any questions, we will answer you as soon as possible! Thank you for your message
Contact Information：
Address: No.49 Jinghu Road, Huadu District, Guangzhou
Sales Consultation
After-sales Service Consultation
